Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D24x33
  • Rig Size:
    20,001 - 30,000 lbs pullback

View Manufacturers View Models

Specifications

Ground Drive Speed 2.5 mph 4 km/h
Height 80.5" 204.5 cm
Max Spindle Torque 3300 ft-lb 4474.2 Nm
Manufacturer's Gross HP Rating 115 hp 85.8 kw
Entry Angle 40 degrees
Weight 65 lb 29 kg
Max Pressure 1300 psi 90 bar
Rated Engine RPM 2500 rpm 2500 rpm
Weight 17000 lb 7711 kg
Make and Model John Deere (4045TF150)
Width 58.5" 148.6 cm
Pullback 24000 lb 10886.2 kg
Max Carriage Speed 144 fpm 43.9 m/min
Length 224" 569 cm
Pump Output 42 GPM
Thrust 24000 lb 10886.2 kg
Rod Carrying Capacity 440' 134.1 m
Drill Stem 10'
Engine John Deere 115HP
Max Spindle Speed 178 RPM 178 RPM
Rod Loader Yes, Single Switch
Type FIRESTICK II
Max Flow 42 gpm 159 L/min
Min Bend Radius 101.9' 31.1 m
Min Bore Diameter 3.5" 8.9 cm
Hydraulic Tank Capacity 55 gal 208 L
Fuel Tank Capacity 42 gal 159 L
Pipe Diameter 2.06" 5.2 cm
Length 3.0 m

Additional Info

DIMENSIONS
Length: 224" (569 cm)
Width: 59" (149 cm)
Height: 81" (205 cm)
Operating weight: 17,000 lbs (7,711 kg)
Hydraulic pipe vise: Yes
Transport speed: 2.5 mph (4 km/h)
Rod loader: Yes - single switch
Stakedown system: Yes
Drilling lights: Yes

OPERATIONAL DATA
Maximum spindle torque:
3300 ft-lb (4468 Nm) @ 134 RPM
2500 ft-lb (3385 Nm) @ 178 RPM
Pullback: 24,000 lbs (10,886 kg)
Maximum spindle speed: 178 RPM
Max. carriage speed: 144 fpm (43.9 m/min)

POWER
Engine: John Deere
Gross HP: 115 HP @ 86KW with 2.50RPM

WATER SYSTEM
Max. flow: 42 gpm (159 L/min)
Max. pressure: 1300 psi (90 bar)
Max. governed speed: 2500 RPM

DRILL STEM
Type: FIRESTICK II
One-piece forged design: Yes
Length: 3.0 m
Pipe diameter: 2.06" (5.2 cm)
Minimum bend radius: 101.9' (31.1 m)
% pitch/stem: 9.8%
Weight: 65 lb (29 kg)

BORE
Minimum bore diameter: 3.5" (8.9 cm)

FLUID CAPACITIES
Hydraulic reservoir: 55 gal (208 L)
Engine oil, including filter: 14 qt (13.2 L)
Fuel tank: 42 gal (159 L)

FEATURES AND BENEFITS
Feature: 3300 ft-lbs. of Rotational Torque
Benefit: With 3300 ft-lbs (4474 Nm) of torque, this
machine has enough power to turn cutting tools in
demanding soil conditions and longer distances
and to accomodate larger backreamers.

Feature: 42 gpm On-Board Pump
Benefit: Backreaming efficiency is improved by
the on-board pump, which also provides high flow
for larger backreams.

Feature: Rack and Pinion Drive
Benefit: This simple system provides smooth operation.
The D24x33's unique narrow rack & pinion design helps
to maintain a small footprint, only 58.5" wide, for
access into congested areas.

Feature: 2-Speed Rotational Operations
Benefit: Allows the operator to match rotational
speeds to varying ground conditions and back
reamer sizes.

Feature: One-piece Pivoting Fiberglass Hood
Benefit: The fiberglass hood can be raised to
provide excellent access to the engine bay
and hydraulic systems.

Feature: Planetary Drive Tracks
Benefit: Light weight and efficient track
drive system provides high torque and transport
speed to steel or rubber track option.

Feature: Independent Rear Outriggers
Benefit: Allows the entry angle of
the machine to be adjusted as needed.

Feature: 2-Speed Transport Drive
Benefit: Allows the range of transport speed to
be varied to improve feathering capabilities while maneuvering.

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x